Early, rare cased, factory engraved, in the early donut scroll style, Colt Model 1849 Pocket percussion revolver s/n 52926

STOCK NUMBER: 6326

PRICE

£ 12,500.00

Early, rare cased, factory engraved, in the early donut scroll style, Colt Model 1849 Pocket percussion revolver s/n 52926, manufactured circa 1852. This .31 calibre, five-shot percussion revolver has a five-inch octagonal barrel, small rounded brass trigger-guard and back-strap, both of which are silver-plated. The grips are made from, one-piece varnished select burl walnut.

The engraving to the barrel, frame, back-strap and trigger-guard, is in the early donut scroll / cloud style, with an hand-engraved ‘SAML COLT’ barrel address and an hand-engraved ‘COLTS/PATENT’ within an oval, on the left side of the frame. The cylinder has the roll design of the stagecoach holdup scene.
Very fine condition, with overall more 50% to 60% original blue and faint case colours. All the five pins on the back of the cylinder are intact. All matching numbers including the wedge (2926).  The bore is very good 8/10 with minor areas of pitting. Good working order. Original case and accessories in fine to excellent condition.  

 

Colt Model 1849 Pocket percussion revolver

 Range of serial numbers: Overlapping with the Baby Dragoon from 12,000 – 340,000

Date of manufacture:   1850 to 1873

Total production:   Approx. 326,000

Length of barrel:   3 to 6 inches

Caliber:   .31

Address: Several variations including:  ‘{ADDRESS, SAML COLT/ NEW-YORK CITY}’
  ‘-ADDRESS SAML COLT/ NEW.YORK CITY’ also ‘-ADDRESS. SAML COLT/ HARTFORD CT-’ and ‘ADDRESS SAML COLT NEW-YORK US AMERICA.’

Weight:   24 ounces. Depending on barrel length.

 

The production of the Colt Model 1849 Pocket revolver in America commenced in 1850 and continued through to 1873. This was the successor to the Baby Dragoon and a total of approximately 326,000 ’49 Pockets were manufactured at the Hartford factory. The serial numbers overlapped with its predecessor from the 12000 serial range through to 340000. There are many variations of the 1849 Pocket but the basic pattern was as follows. It was in .31 caliber with an octagonal barrel with the majority having loading levers (the Wells Fargo models are found without levers) and came with different barrel lengths of 3”, 4”, 5” or 6”. It is found with five or six shot cylinders in specific serial ranges with large and small oval trigger-guards. The barrel and cylinder were blued with the frame, hammer and loading lever casehardened. The back-strap and trigger-guard were mainly silver-plated brass but some were steel and blued or silver-plated. The grips were of one-piece varnished walnut or select burl walnut, ivory on engraved or special order guns. Other finishes include silver-plating, gold-plating and a mixture of both. One Pocket #181885 is known with a gilt silver finish.

 

There are several barrel addresses including ‘ADDRESS SAM’ COLT/NEW-YORK CITY’, ‘ADDRESS SAM’ COLT/HARTFORD CT’ and ‘ADDRESS COL. SAM COLT NEW-YORK U.S. AMERICA’. On a few is found the one or two line address of ‘ADDRESS.COL: COLT./LONDON’. On engraved and special order Pockets, hand-engraved ‘SAML COLT’ is often encountered.  The frame was stamped on the left side of all revolvers with ‘COLTS/PATENT’. On engraved and special order Pockets, hand-engraved ‘COLT’S PATENT’ is often encountered. The cylinder had the roll design of the stagecoach holdup scene. From 1850 to 1873 there were many changes and variations made of trigger guards, loading cutouts, loading lever latches, sights, hammers, muzzles, finishes, engraving, etc.

 

One variation is the ‘Wells Fargo’ model which was made with both long (approximately 4200 according to Jordan & Watt) and short frames (approximately 2200 according to Jordan & Watt), small rounded brass trigger-guard, mostly three inch octagonal barrel (some four inch barrels are known) and without loading lever. Beware of fakes. It is estimated that no more than three thousand one hundred Colt Model 1849 Pocket revolvers were engraved in various styles of engraving by different factory engravers such as Gustave Young. Many Colt Model 1849 revolvers were cased.

 

Philip Boulton of Southampton, England has collated and recorded a survival rate of at least 2.59% of the original production of Colt Model 1849 London Pocket revolvers. For in-depth reference on the Colt Baby Dragoon revolvers see ‘Colt’s Pocket ’49, it’s Evolution, including the Baby Dragoon & Wells Fargo’ by Robert M. Jordan & Darrow M. Watt.

 

HOME PAGE

COLT

WINCHESTER

REMINGTON

S&W

GUN CASES

OTHER AMERICAN MANUFACTURERS

ENGLISH & EUROPEAN

SWORDS & BOWIE KNIVES

ORNAMENTS

POWDER FLASKS

MISCELLANEOUS

BULLET MOULDS

REFERENCE BOOKS

OIL BOTTLES

GUN GRIPS

HOLSTERS

CAP TINS